Halogen-Free Flexible Marine Power Cable 0.6/1 kV
This 0.6/1 kV halogen-free flexible power cable is engineered for protected power distribution and electrical equipment wiring aboard ships. Its flexible tinned copper conductors support convenient installation, while the SHF1 outer sheath provides low-smoke, flame-retardant and non-corrosive performance in safety-critical marine environments.
Key Highlights
Halogen-free marine power cable · 0.6/1 kV rated · 4000 V test voltage · Flexible Class 5 tinned copper conductors · SHF1 marine outer sheath · Low smoke density · Flame-retardant and self-extinguishing · No flame propagation · Non-corrosive combustion gases · Compact multicore construction · Wide conductor-size range · RoHS-compatible
Suitable for flexible power and auxiliary supply circuits installed above or below deck with appropriate mechanical protection.
Typical applications include:
- Marine power distribution systems
- Shipboard machinery and auxiliary equipment
- Engine-room power circuits
- Pumps, fans and ventilation equipment
- Control panels and distribution boards
- Navigation and deck equipment
- Protected power wiring in confined spaces
The standard construction is not intended for permanent contact with oils or fuels. An oil-resistant customized sheath should be specified where continuous exposure is expected.
Conductor: Fine-stranded tinned copper, Class 5 according to IEC 60228/VDE 0295
Core insulation: Special halogen-free compound
Core identification: Black cores with consecutive numbers according to EN 50334
Protective conductor: Green-yellow earth conductor included from three-core configurations
Core arrangement: Cores stranded together in layers
Screen: Unscreened
Outer sheath: Halogen-free SHF1 compound according to IEC 60092-360
Standard sheath color: Black, similar to RAL 9005
Optional construction: Bare copper conductors, alternative identification systems and customized sheath colors available on request
Nominal voltage: U₀/U 0.6/1 kV
Test voltage: 4000 V core-to-core
Minimum bending radius:
- Fixed installation: 4 × cable diameter
- Flexible application: 6 × cable diameter
Temperature range:
- Fixed installation: −40°C to +90°C
- Flexible application: −30°C to +90°C
Conductor class: IEC 60228 Class 5
Halogen-free performance: IEC 60754-1
Flame propagation: IEC 60332-3-22, Category A
Flame retardancy: IEC 60332-1-2
Corrosiveness of combustion gases: IEC 60754-2
Smoke density: IEC 61034
Outer sheath standard: IEC 60092-360 SHF1
Environmental compliance: RoHS-compatible materials
Marine approval, PFAS-free formulation and Hong Kong Convention material requirements must be confirmed for the selected HULK construction.
Representative standard configurations:
| Number of Cores × Cross-Section | Approx. Outer Diameter | Copper Weight | Approx. Cable Weight |
| 2 × 1.50 mm² | 8.9 mm | 28.8 kg/km | 120 kg/km |
| 18 × 1.50 mm² | 19.5 mm | 259.2 kg/km | 589 kg/km |
| 2 × 2.50 mm² | 9.7 mm | 48.0 kg/km | 151 kg/km |
| 18 × 2.50 mm² | 21.7 mm | 432.0 kg/km | 797 kg/km |
| 2 × 4.00 mm² | 11.9 mm | 76.8 kg/km | 230 kg/km |
| 7 × 4.00 mm² | 17.0 mm | 268.8 kg/km | 520 kg/km |
| 2 × 6.00 mm² | 12.9 mm | 115.2 kg/km | 287 kg/km |
| 7 × 6.00 mm² | 18.5 mm | 403.2 kg/km | 674 kg/km |
| 5 × 16.00 mm² | 24.7 mm | 768.0 kg/km | 1218 kg/km |
| 5 × 25.00 mm² | 29.9 mm | 1200.0 kg/km | 1828 kg/km |
| 4 × 35.00 mm² | 30.4 mm | 1344.0 kg/km | 1968 kg/km |
| 4 × 50.00 mm² | 34.3 mm | 1920.0 kg/km | 2738 kg/km |
Available conductor sizes range from approximately 1.50 mm² to 50.00 mm². Core counts vary according to conductor cross-section. Outer diameters are subject to a tolerance of approximately ±10%.
THE FACTORY
BEHIND EVERY METER
Founded in 2007 in Foshan, Guangdong, Hulk Electric has grown from a regional producer into a globally recognised manufacturer of customised industrial cable solutions. Our 10,000㎡ facility runs on Toyota Production System lean principles, operated by 150+ skilled professionals producing over 300,000 metres every month.
Every cable you see on this page — including the HK-TRVV series — is engineered, extruded, tested, and shipped from that single facility. No trading company sits between you and the extrusion line.
Source Factory
Direct manufacturer — no middlemen, no markups. You deal with the engineers who run the line.
Deep Customization
Conductor, shielding, jacket compound, colour coding, certification — built to your exact spec.
7-Day Sampling
Rapid samples for new specifications. 15-day lead time on standard production orders.
Global Compliance
35+ certifications covering UL, CE, TÜV, IEC, RoHS and REACH for every major market.
BEFORE YOU ORDER
For stocked configurations listed in the ordering table, MOQ is 100 metres per specification. Custom configurations — non-standard core counts, jacket colours, or special compounds — carry a 500 metre MOQ. Samples of 5–10 metres are available free of charge for qualification testing.
Use shielded (P or PP suffix) whenever the cable runs alongside servo drives, VFDs, or inverters, or when carrying encoder, sensor, or analogue signals. Unshielded is suitable for pure power distribution and simple on/off control lines. If in doubt, our engineering team can review your cabinet layout and advise — this is included with any quotation.
Yes. Send us the existing part number or a sample and we will produce a cross-reference specification with matching electrical, mechanical, and dimensional characteristics. Most cross-references are turned around within 3 working days, with a physical sample following within 7 days.
Standard shipments include the CE Declaration of Conformity, RoHS and REACH statements, and the batch test report. UL Recognition (UL 2464 / UL 20549) is available on request for North American projects — specify this at the quotation stage as it affects the material specification.
Standard configurations ship in 15 working days from order confirmation. Custom-engineered specifications typically require 20–25 working days, depending on compound availability. Rapid sampling for new specifications is 7 days. We will confirm the exact date in writing with your order acknowledgement.
SEND US YOUR
SPECIFICATION
Tell us your core count, cross-section, and application — our engineering team will confirm the right configuration and send pricing within one working day.
Your information is used only to prepare your quotation and is never shared with third parties.
RELATED SERIES
Halogen-Free Screened Control Cable with Numbered Cores
Low smoke zero halogen jacket with numbered cores for fast identification during panel wiring and maintenance.
View Product →
Halogen-Free Single Conductor Wiring Cable 450/750 V
Extended temperature range for control cabinet and switchgear wiring where flame behaviour is critical.
View Product →
Halogen-Free Screened Control Cable with Numbered Cores
Low smoke zero halogen construction with braid screening for reliable EMC performance in dense cabinets.
View Product →
Halogen-Free Single Conductor Wiring Cable 600 V UL
Flame retardant and UL recognised for North American panel builds and export-bound equipment.
View Product →