Flexible PVC PROFIBUS DP Cable
A flexible PVC PROFIBUS DP cable design for control panels and machine wiring. A foil-wrapped, braid-screened data pair is available as a reference layout on its own or with three additional cores for auxiliary circuits.
Key Highlights
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
This design suits connections between a PLC, remote I/O, and field devices where the cable needs flexibility during routing, setup, or servicing. The hybrid construction is relevant when the field device needs both a PROFIBUS connection and auxiliary wiring through one cable entry. Compare other jacket and motion options in the PROFIBUS DP and FMS cable range.
| Component | Reference design |
| Data conductors | 2 × 0.34 mm² stranded bare copper with red and green 02YI1 polyethylene insulation |
| Pair screen | Aluminum foil and tinned copper braid |
| Additional cores in hybrid version | 3 × 1.00 mm² Class 5 stranded bare copper with TI2 PVC insulation, including a green/yellow earth core |
| Outer jacket | TM2 PVC, red lilac (RAL 4001) |
| Parameter | Reference value |
| Installation duty | Fixed routing and general flexible use |
| Characteristic impedance, data-only version | 150 Ω ±10% at 3–20 MHz |
| Peak operating voltage | 350 V max. |
| Dielectric test voltage | 1,500 V core-to-core and core-to-screen |
| Minimum bend radius | 12 × cable OD |
| Temperature range | −30 to +70 °C fixed, −5 to +70 °C flexible |
| Single-cable flame test reference | IEC 60332-1-2 |
| Oil resistance test | Manufacturer-specific reference method |
| Conductor layout | Nominal OD (±10%) | Copper figure | Approx. cable weight |
| 1 screened pair × 0.34 mm² | 7.5 mm | 25.8 kg/km | 56 kg/km |
| 1 screened pair × 0.34 mm² + 3 × 1.00 mm² | 10.1 mm | 58.8 kg/km | 122 kg/km |
THE FACTORY
BEHIND EVERY METER
Founded in 2007 in Foshan, Guangdong, Hulk Electric has grown from a regional producer into a globally recognised manufacturer of customised industrial cable solutions. Our 10,000㎡ facility runs on Toyota Production System lean principles, operated by 150+ skilled professionals producing over 300,000 metres every month.
Every cable you see on this page — including the HK-TRVV series — is engineered, extruded, tested, and shipped from that single facility. No trading company sits between you and the extrusion line.
Source Factory
Direct manufacturer — no middlemen, no markups. You deal with the engineers who run the line.
Deep Customization
Conductor, shielding, jacket compound, colour coding, certification — built to your exact spec.
7-Day Sampling
Rapid samples for new specifications. 15-day lead time on standard production orders.
Global Compliance
35+ certifications covering UL, CE, TÜV, IEC, RoHS and REACH for every major market.
BEFORE YOU ORDER
For stocked configurations listed in the ordering table, MOQ is 100 metres per specification. Custom configurations — non-standard core counts, jacket colours, or special compounds — carry a 500 metre MOQ. Samples of 5–10 metres are available free of charge for qualification testing.
Use shielded (P or PP suffix) whenever the cable runs alongside servo drives, VFDs, or inverters, or when carrying encoder, sensor, or analogue signals. Unshielded is suitable for pure power distribution and simple on/off control lines. If in doubt, our engineering team can review your cabinet layout and advise — this is included with any quotation.
Yes. Send us the existing part number or a sample and we will produce a cross-reference specification with matching electrical, mechanical, and dimensional characteristics. Most cross-references are turned around within 3 working days, with a physical sample following within 7 days.
Standard shipments include the CE Declaration of Conformity, RoHS and REACH statements, and the batch test report. UL Recognition (UL 2464 / UL 20549) is available on request for North American projects — specify this at the quotation stage as it affects the material specification.
Standard configurations ship in 15 working days from order confirmation. Custom-engineered specifications typically require 20–25 working days, depending on compound availability. Rapid sampling for new specifications is 7 days. We will confirm the exact date in writing with your order acknowledgement.
Engineering Support for Your Application
Tell Us How Your Cable Needs to Move
Send us a datasheet, drawing, existing cable model or a short description of your application. Our engineering team will help you identify a suitable cable construction.
- 01 Motion type, travel distance and minimum bend radius
- 02 Voltage, current, signal protocol and shielding needs
- 03 Operating environment, target service life and quantity