Unscreened Halogen-Free Flexible Marine Data Cable
This compact halogen-free marine data cable is designed for flexible signal, monitoring and low-voltage data connections that do not require an overall electromagnetic screen. Class 5 tinned-copper conductors and a small outer diameter make the cable easy to route through confined shipboard spaces.
The SHF1-type halogen-free outer sheath supports protected installation above and below deck where flame performance, low smoke emission and flexible handling are important.
Key Highlights
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Recommended for unscreened low-voltage signal and data circuits in shipbuilding and marine equipment.
Typical applications include:
- Shipboard alarm circuits
- Monitoring equipment
- Marine control cabinets
- Low-interference sensor circuits
- Internal equipment wiring
- Vessel automation equipment
- Indicator and signaling systems
- Protected above-deck routing
- Protected below-deck routing
- Compact multicore connections
For routes affected by electromagnetic interference, use an overall-screened or individually screened marine data cable instead.
| Component | Construction |
| Conductor | Class 5 tinned-copper strands according to IEC 60228 |
| Optional conductor | Bare copper available subject to design confirmation |
| Core insulation | Special halogen-free polymer compound |
| Core identification | Color-coded with reference to DIN 47100 |
| Core assembly | Insulated conductors stranded in layers |
| Overall screen | None |
| Outer sheath | Halogen-free SHF1-type compound with reference to IEC 60092-360 |
| Standard sheath color | Pigeon blue, similar to RAL 5014 |
| Optional versions | Alternative core identification and sheath colors available on request |
| Property | Reference Value |
| Maximum operating voltage | 350 V |
| Test voltage, core to core | 1500 V |
| Minimum bending radius, fixed installation | 5 × cable diameter |
| Minimum bending radius, flexible installation | 10 × cable diameter |
| Temperature range, fixed installation | −40°C to +90°C |
| Temperature range, flexible installation | −30°C to +90°C |
| Halogen-free reference | IEC 60754-1 |
| Flame propagation reference | IEC 60332-3-22 Category A |
| Flame-retardant reference | IEC 60332-1-2 |
| Combustion-gas corrosiveness | Reference performance according to IEC 60754-2 |
| Smoke-density reference | IEC 61034 |
| Sheath reference | SHF1-type compound with reference to IEC 60092-360 |
| Flexibility | Very good for installation and occasional movement |
| Environmental compliance options | RoHS-compliant and PFAS-free compounds, subject to confirmation |
| Marine approval option | DNV approval may only be claimed for HULK constructions covered by valid certification |
| Core Configuration | Approx. Outer Diameter | Copper Weight | Approx. Cable Weight |
| 2 × 0.14 mm² | 3.6 mm | 2.7 kg/km | 18 kg/km |
| 8 × 0.14 mm² | 5.5 mm | 10.8 kg/km | 42 kg/km |
| 16 × 0.14 mm² | 7.0 mm | 21.5 kg/km | 70 kg/km |
| 2 × 0.25 mm² | 3.9 mm | 4.8 kg/km | 22 kg/km |
| 8 × 0.25 mm² | 6.2 mm | 19.2 kg/km | 57 kg/km |
| 16 × 0.25 mm² | 7.7 mm | 38.4 kg/km | 93 kg/km |
| 2 × 0.34 mm² | 4.3 mm | 6.5 kg/km | 28 kg/km |
| 8 × 0.34 mm² | 7.0 mm | 26.1 kg/km | 73 kg/km |
| 16 × 0.34 mm² | 9.0 mm | 52.5 kg/km | 129 kg/km |
| 2 × 0.50 mm² | 4.7 mm | 9.6 kg/km | 35 kg/km |
| 8 × 0.50 mm² | 7.7 mm | 38.4 kg/km | 95 kg/km |
| 16 × 0.50 mm² | 10.0 mm | 76.8 kg/km | 169 kg/km |
| 2 × 0.75 mm² | 5.2 mm | 14.4 kg/km | 43 kg/km |
| 8 × 0.75 mm² | 8.8 mm | 57.6 kg/km | 126 kg/km |
| 16 × 0.75 mm² | 11.1 mm | 115.2 kg/km | 212 kg/km |
Outer diameter tolerance: Approximately ±10%
Additional core counts are available within the listed conductor-size range. Final dimensions, copper content and cable weight must be confirmed against the approved HULK production drawing.
THE FACTORY
BEHIND EVERY METER
Founded in 2007 in Foshan, Guangdong, Hulk Electric has grown from a regional producer into a globally recognised manufacturer of customised industrial cable solutions. Our 10,000㎡ facility runs on Toyota Production System lean principles, operated by 150+ skilled professionals producing over 300,000 metres every month.
Every cable you see on this page — including the HK-TRVV series — is engineered, extruded, tested, and shipped from that single facility. No trading company sits between you and the extrusion line.
Source Factory
Direct manufacturer — no middlemen, no markups. You deal with the engineers who run the line.
Deep Customization
Conductor, shielding, jacket compound, colour coding, certification — built to your exact spec.
7-Day Sampling
Rapid samples for new specifications. 15-day lead time on standard production orders.
Global Compliance
35+ certifications covering UL, CE, TÜV, IEC, RoHS and REACH for every major market.
BEFORE YOU ORDER
For stocked configurations listed in the ordering table, MOQ is 100 metres per specification. Custom configurations — non-standard core counts, jacket colours, or special compounds — carry a 500 metre MOQ. Samples of 5–10 metres are available free of charge for qualification testing.
Use shielded (P or PP suffix) whenever the cable runs alongside servo drives, VFDs, or inverters, or when carrying encoder, sensor, or analogue signals. Unshielded is suitable for pure power distribution and simple on/off control lines. If in doubt, our engineering team can review your cabinet layout and advise — this is included with any quotation.
Yes. Send us the existing part number or a sample and we will produce a cross-reference specification with matching electrical, mechanical, and dimensional characteristics. Most cross-references are turned around within 3 working days, with a physical sample following within 7 days.
Standard shipments include the CE Declaration of Conformity, RoHS and REACH statements, and the batch test report. UL Recognition (UL 2464 / UL 20549) is available on request for North American projects — specify this at the quotation stage as it affects the material specification.
Standard configurations ship in 15 working days from order confirmation. Custom-engineered specifications typically require 20–25 working days, depending on compound availability. Rapid sampling for new specifications is 7 days. We will confirm the exact date in writing with your order acknowledgement.
Engineering Support for Your Application
Tell Us How Your Cable Needs to Move
Send us a datasheet, drawing, existing cable model or a short description of your application. Our engineering team will help you identify a suitable cable construction.
- 01 Motion type, travel distance and minimum bend radius
- 02 Voltage, current, signal protocol and shielding needs
- 03 Operating environment, target service life and quantity