Solid-Wire Fiberglass-Braided Armoured Thermocouple Cable
This thermocouple cable uses solid thermocouple conductors with heat-resistant silicone insulation, a fiberglass braid and galvanized steel-wire armouring. Its robust construction is intended primarily for fixed temperature-measurement installations exposed to heat and mechanical stress.
Key Highlights
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Recommended for fixed or carefully routed thermocouple and compensating circuits in demanding industrial environments.
Typical applications include:
- Industrial furnaces and ovens
- Heat-treatment equipment
- Foundry machinery
- Process-control systems
- High-temperature sensor installations
- Plastic and rubber-processing equipment
- Fixed temperature-monitoring circuits
- Industrial test equipment
Because the conductors are solid rather than stranded, the cable should not be specified for continuous-flex applications.
Conductor: Solid thermocouple extension or compensating wire
Number of cores: Two or four
Core insulation: Heat-resistant silicone compound, type EI2 according to EN 50363-1
Core assembly: Insulated cores laid together
Protective braid: Fiberglass braid
Armouring: Galvanized steel-wire armour with identification tracer
Overall shape: Round
Standard conductor cross-section: 1.50 mm²
Alternative conductor sizes: 1.00 mm², 0.75 mm², 0.50 mm² and 0.22 mm², subject to construction verification
Thermocouple options: T, J, K, E, R/S, N, L and application-specific compensating types
Minimum bending radius: 12 × cable diameter
Temperature range:
- Fixed installation: −40°C to +180°C
- Flexible handling during installation: −25°C to +180°C
- Short-time exposure: Up to +250°C
Insulation resistance: Greater than 1 MΩ·km
Halogen-free performance: According to IEC 60754-1
Corrosiveness of combustion gases: According to IEC 60754-2
Flame performance: Flame-retardant and self-extinguishing according to IEC 60332-1-2
Recommended movement: Fixed installation; not intended for continuous cyclic bending
Compliance reference: RoHS-compliant and PFAS-free material options
Representative two-core construction:
| Conductor Construction | Nominal Cross-Section | Approx. Outer Diameter | Approx. Weight |
| Solid wire | 1.50 mm² | 5.5 mm | 6.4 kg/100 m |
Four-core and customized conductor configurations require confirmation against the finished cable drawing.
THE FACTORY
BEHIND EVERY METER
Founded in 2007 in Foshan, Guangdong, Hulk Electric has grown from a regional producer into a globally recognised manufacturer of customised industrial cable solutions. Our 10,000㎡ facility runs on Toyota Production System lean principles, operated by 150+ skilled professionals producing over 300,000 metres every month.
Every cable you see on this page — including the HK-TRVV series — is engineered, extruded, tested, and shipped from that single facility. No trading company sits between you and the extrusion line.
Source Factory
Direct manufacturer — no middlemen, no markups. You deal with the engineers who run the line.
Deep Customization
Conductor, shielding, jacket compound, colour coding, certification — built to your exact spec.
7-Day Sampling
Rapid samples for new specifications. 15-day lead time on standard production orders.
Global Compliance
35+ certifications covering UL, CE, TÜV, IEC, RoHS and REACH for every major market.
BEFORE YOU ORDER
For stocked configurations listed in the ordering table, MOQ is 100 metres per specification. Custom configurations — non-standard core counts, jacket colours, or special compounds — carry a 500 metre MOQ. Samples of 5–10 metres are available free of charge for qualification testing.
Use shielded (P or PP suffix) whenever the cable runs alongside servo drives, VFDs, or inverters, or when carrying encoder, sensor, or analogue signals. Unshielded is suitable for pure power distribution and simple on/off control lines. If in doubt, our engineering team can review your cabinet layout and advise — this is included with any quotation.
Yes. Send us the existing part number or a sample and we will produce a cross-reference specification with matching electrical, mechanical, and dimensional characteristics. Most cross-references are turned around within 3 working days, with a physical sample following within 7 days.
Standard shipments include the CE Declaration of Conformity, RoHS and REACH statements, and the batch test report. UL Recognition (UL 2464 / UL 20549) is available on request for North American projects — specify this at the quotation stage as it affects the material specification.
Standard configurations ship in 15 working days from order confirmation. Custom-engineered specifications typically require 20–25 working days, depending on compound availability. Rapid sampling for new specifications is 7 days. We will confirm the exact date in writing with your order acknowledgement.
Engineering Support for Your Application
Tell Us How Your Cable Needs to Move
Send us a datasheet, drawing, existing cable model or a short description of your application. Our engineering team will help you identify a suitable cable construction.
- 01 Motion type, travel distance and minimum bend radius
- 02 Voltage, current, signal protocol and shielding needs
- 03 Operating environment, target service life and quantity
