High-Flex Shielded Twisted-Pair TPE/PUR Data Cable

This shielded twisted-pair data cable is designed for reliable signal transmission in continuously moving industrial equipment. Extra-fine copper conductors, pair twisting, an overall tinned-copper screen and a durable PUR sheath provide high flexibility, improved EMC performance and resistance to demanding mechanical conditions.

Key Highlights

Twisted-pair construction · Overall tinned-copper screen · Good EMC performance · Reduced signal interference · Continuous-flex design · Extra-fine copper conductors · Halogen-free TPE insulation · Abrasion-resistant PUR sheath · Flexible at low temperatures · Travel distances above 10 m possible · PWIS non-critical · PFAS-free · RoHS compliant

Application
Construction
Technical Data
Dimensions
Packaging

Designed for paired data, measuring, control and signal transmission in drag chains and continuously moving systems. Suitable for construction machinery, material-handling equipment, automated manufacturing systems, packaging and woodworking machines, industrial robots, automotive production lines and automated warehouses.

The twisted-pair arrangement and overall copper-braid screen help reduce electromagnetic interference and crosstalk in industrial signal circuits.

Conductor: Extra-fine stranded bare copper wires
Core insulation: TPE
Core identification: Colored cores based on DIN 47100
Pair construction: Insulated cores twisted into pairs
Overall stranding: Pairs stranded in specially adjusted layers with non-woven tape over each layer
Inner wrapping: Non-woven tape
Overall screen: Tinned-copper wire braid
Screen wrapping: Non-woven tape
Outer sheath: Matte PUR/TMPU according to EN 50363-10-2 and VDE 0207-363-10-2
Standard sheath color: Grey, similar to RAL 7032

Peak operating voltage: Maximum 350 V according to VDE 0812
Test voltage: 1500 V core-to-core
Test voltage: 1200 V core-to-screen
Minimum bending radius for continuous flexing: 7.5 × cable diameter
Fixed installation temperature: -50°C to +90°C
Flexible application temperature: -40°C to +90°C
Radiation resistance: 1 × 10⁷ cJ/kg
Halogen-free: According to IEC 60754-1 and VDE 0482-754-1
Oil resistance: Very good; TMPU according to EN 50363-10-2 and VDE 0207-363-10-2
Chemical resistance: Good resistance to acids, alkaline solutions, solvents and hydraulic fluids
Continuous-flex performance: Very good
Weather resistance: Very good
Compliance: RoHS
PFAS status: PFAS-free

Outer diameters are approximate and subject to a tolerance of ±10%.

Pairs × Cross-Section (mm²)	Largest Wire Ø (mm)	Outer Ø (mm)	Copper Weight (kg/km)	Cable Weight (kg/km)
2 × 2 × 0.14	0.11	4.4	17.4	29
3 × 2 × 0.14	0.11	4.9	20.2	30
4 × 2 × 0.14	0.11	5.6	24.7	40
5 × 2 × 0.14	0.11	6.0	28.8	43
6 × 2 × 0.14	0.11	6.4	31.5	52
7 × 2 × 0.14	0.11	6.7	35.9	59
10 × 2 × 0.14	0.11	7.9	47.5	72
14 × 2 × 0.14	0.11	9.0	62.7	97
18 × 2 × 0.14	0.11	10.0	89.6	127
25 × 2 × 0.14	0.11	11.7	114.3	167
2 × 2 × 0.25	0.11	4.9	21.8	33
3 × 2 × 0.25	0.11	5.5	28.3	41
4 × 2 × 0.25	0.11	6.4	36.1	51
5 × 2 × 0.25	0.11	6.9	41.1	60
6 × 2 × 0.25	0.11	7.1	47.3	69
7 × 2 × 0.25	0.11	7.4	54.1	81
10 × 2 × 0.25	0.11	8.9	70.8	100
14 × 2 × 0.25	0.11	10.9	108.7	150
18 × 2 × 0.25	0.11	11.6	133.4	185
25 × 2 × 0.25	0.11	13.8	171.9	259
2 × 2 × 0.34	0.11	5.2	20.3	38
3 × 2 × 0.34	0.11	5.8	34.9	47
4 × 2 × 0.34	0.11	6.9	43.2	62
5 × 2 × 0.34	0.11	7.4	53.1	72
7 × 2 × 0.34	0.11	8.0	66.4	94
10 × 2 × 0.34	0.11	9.6	90.5	122
14 × 2 × 0.34	0.11	11.6	138.3	179
18 × 2 × 0.34	0.11	12.5	169.2	220
25 × 2 × 0.34	0.11	14.7	247.3	310
2 × 2 × 0.50	0.11	6.3	34.6	51
3 × 2 × 0.50	0.11	6.9	47.3	67
4 × 2 × 0.50	0.11	7.9	61.4	84
5 × 2 × 0.50	0.11	8.8	73.1	101
7 × 2 × 0.50	0.11	9.4	108.4	134
10 × 2 × 0.50	0.11	11.3	143.3	186
14 × 2 × 0.50	0.11	13.5	191.7	251
18 × 2 × 0.50	0.11	14.7	257.8	329
25 × 2 × 0.50	0.11	17.0	336.5	429
2 × 2 × 0.75	0.11	7.2	47.4	69
3 × 2 × 0.75	0.11	7.9	66.2	84
4 × 2 × 0.75	0.11	8.9	101.0	107
5 × 2 × 0.75	0.11	10.4	118.8	147
7 × 2 × 0.75	0.11	11.6	148.0	208
10 × 2 × 0.75	0.11	13.5	228.0	263
14 × 2 × 0.75	0.11	16.1	296.9	366
18 × 2 × 0.75	0.11	17.3	366.1	456
25 × 2 × 0.75	0.11	20.1	480.5	597

Other pair counts, conductor sizes, colors and customized dimensions are available on request.

hulk packing

About Hulk Electric

THE FACTORY
BEHIND EVERY METER

Founded in 2007 in Foshan, Guangdong, Hulk Electric has grown from a regional producer into a globally recognised manufacturer of customised industrial cable solutions. Our 10,000㎡ facility runs on Toyota Production System lean principles, operated by 150+ skilled professionals producing over 300,000 metres every month.

Every cable you see on this page — including the HK-TRVV series — is engineered, extruded, tested, and shipped from that single facility. No trading company sits between you and the extrusion line.

20+Years Manufacturing

30+Countries Served

10K㎡Factory Floor

35+Certifications

About Our Factory Talk to an Engineer

Source Factory

Direct manufacturer — no middlemen, no markups. You deal with the engineers who run the line.

Deep Customization

Conductor, shielding, jacket compound, colour coding, certification — built to your exact spec.

7-Day Sampling

Rapid samples for new specifications. 15-day lead time on standard production orders.

Global Compliance

35+ certifications covering UL, CE, TÜV, IEC, RoHS and REACH for every major market.

Common Questions

BEFORE YOU ORDER

For stocked configurations listed in the ordering table, MOQ is 100 metres per specification. Custom configurations — non-standard core counts, jacket colours, or special compounds — carry a 500 metre MOQ. Samples of 5–10 metres are available free of charge for qualification testing.

Use shielded (P or PP suffix) whenever the cable runs alongside servo drives, VFDs, or inverters, or when carrying encoder, sensor, or analogue signals. Unshielded is suitable for pure power distribution and simple on/off control lines. If in doubt, our engineering team can review your cabinet layout and advise — this is included with any quotation.

Yes. Send us the existing part number or a sample and we will produce a cross-reference specification with matching electrical, mechanical, and dimensional characteristics. Most cross-references are turned around within 3 working days, with a physical sample following within 7 days.

Standard shipments include the CE Declaration of Conformity, RoHS and REACH statements, and the batch test report. UL Recognition (UL 2464 / UL 20549) is available on request for North American projects — specify this at the quotation stage as it affects the material specification.

Standard configurations ship in 15 working days from order confirmation. Custom-engineered specifications typically require 20–25 working days, depending on compound availability. Rapid sampling for new specifications is 7 days. We will confirm the exact date in writing with your order acknowledgement.

Get a Quotation

SEND US YOUR
SPECIFICATION

Tell us your core count, cross-section, and application — our engineering team will confirm the right configuration and send pricing within one working day.

Reply within 1 working day

Free samples for qualification

Cross-reference from any brand

Direct factory pricing — no middlemen