Halogen-Free Twisted-Triple Screened Marine Data Cable 300 V
This halogen-free marine data cable features conductors arranged in twisted triples and protected by an overall tinned copper braid. The triple construction supports organized signal transmission, while the screened, low-smoke design provides EMC protection and improved fire safety for marine control systems.
Key Highlights
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Recommended for marine measurement, instrumentation and control circuits that require conductors arranged in three-core groups.
Typical applications include:
- Ship automation systems
- Three-wire sensor circuits
- Marine measurement equipment
- Instrumentation and monitoring systems
- Control and communication equipmentConductor: Fine-stranded tinned copper, Class 5 according to IEC 60228/VDE 0295Core insulation: Special halogen-free compoundCore identification:
- Up to 0.25 mm²: Color-coded with reference to DIN 47100
- From 0.34 mm²: White, blue and red cores with triple numbering
Triple formation: White, blue and red cores twisted together into triples
Cable assembly: Twisted triples stranded together in layers
Inner wrapping: PETP foil
Overall screen: Tinned copper braid
Outer sheath: Halogen-free SHF1 compound according to IEC 60092-360
Standard sheath color: Pigeon blue, similar to RAL 501
- EMC-sensitive signal transmission above or below deck
Installation should be protected where exposure to mechanical damage, oil or fuel is possible.
Conductor: Fine-stranded tinned copper, Class 5 according to IEC 60228/VDE 0295
Core insulation: Special halogen-free compound
Core identification:
- Up to 0.25 mm²: Color-coded with reference to DIN 47100
- From 0.34 mm²: White, blue and red cores with triple numbering
Triple formation: White, blue and red cores twisted together into triples
Cable assembly: Twisted triples stranded together in layers
Inner wrapping: PETP foil
Overall screen: Tinned copper braid
Outer sheath: Halogen-free SHF1 compound according to IEC 60092-360
Standard sheath color: Pigeon blue, similar to RAL 5014
Maximum operating voltage: 300 V
Test voltage:
- Core-to-core: 1500 V
- Core-to-screen: 1200 V
Minimum bending radius:
- Fixed installation: 5 × cable diameter
- Flexible application: 10 × cable diameter
Temperature range:
- Fixed installation: −40°C to +90°C
- Flexible application: −30°C to +90°C
Halogen-free performance: IEC 60754-1
Flame propagation: IEC 60332-3-22, Category A
Flame retardancy: IEC 60332-1-2
Corrosiveness of combustion gases: IEC 60754-2
Smoke density: IEC 61034
Sheath standard: IEC 60092-360 SHF1
Environmental compliance: RoHS-compatible materials
Marine certification requirements must be confirmed against the selected construction and certificate scope.
The configuration indicates the number of triples × three cores × conductor cross-section.
| Triple Configuration | Approx. Outer Diameter | Copper Weight | Approx. Cable Weight |
| 2 × 3 × 0.25 mm² | 7.2 mm | 35.7 kg/km | 68 kg/km |
| 4 × 3 × 0.25 mm² | 8.8 mm | 55.0 kg/km | 103 kg/km |
| 7 × 3 × 0.25 mm² | 10.6 mm | 98.1 kg/km | 161 kg/km |
| 10 × 3 × 0.25 mm² | 13.4 mm | 131.9 kg/km | 235 kg/km |
| 2 × 3 × 0.34 mm² | 8.0 mm | 43.4 kg/km | 82 kg/km |
| 4 × 3 × 0.34 mm² | 9.8 mm | 68.3 kg/km | 127 kg/km |
| 7 × 3 × 0.34 mm² | 11.9 mm | 123.0 kg/km | 202 kg/km |
| 10 × 3 × 0.34 mm² | 15.2 mm | 195.5 kg/km | 313 kg/km |
| 2 × 3 × 0.50 mm² | 9.0 mm | 55.0 kg/km | 105 kg/km |
| 4 × 3 × 0.50 mm² | 10.7 mm | 105.3 kg/km | 161 kg/km |
| 7 × 3 × 0.50 mm² | 13.2 mm | 160.6 kg/km | 254 kg/km |
| 10 × 3 × 0.50 mm² | 16.9 mm | 254.0 kg/km | 391 kg/km |
| 2 × 3 × 0.75 mm² | 10.4 mm | 90.8 kg/km | 144 kg/km |
| 4 × 3 × 0.75 mm² | 12.6 mm | 145.9 kg/km | 223 kg/km |
| 7 × 3 × 0.75 mm² | 15.2 mm | 248.8 kg/km | 350 kg/km |
| 10 × 3 × 0.75 mm² | 19.3 mm | 340.6 kg/km | 504 kg/km |
Outer diameters are subject to a tolerance of approximately ±10%. Customized triple counts and conductor sizes are available on request.
THE FACTORY
BEHIND EVERY METER
Founded in 2007 in Foshan, Guangdong, Hulk Electric has grown from a regional producer into a globally recognised manufacturer of customised industrial cable solutions. Our 10,000㎡ facility runs on Toyota Production System lean principles, operated by 150+ skilled professionals producing over 300,000 metres every month.
Every cable you see on this page — including the HK-TRVV series — is engineered, extruded, tested, and shipped from that single facility. No trading company sits between you and the extrusion line.
Source Factory
Direct manufacturer — no middlemen, no markups. You deal with the engineers who run the line.
Deep Customization
Conductor, shielding, jacket compound, colour coding, certification — built to your exact spec.
7-Day Sampling
Rapid samples for new specifications. 15-day lead time on standard production orders.
Global Compliance
35+ certifications covering UL, CE, TÜV, IEC, RoHS and REACH for every major market.
BEFORE YOU ORDER
For stocked configurations listed in the ordering table, MOQ is 100 metres per specification. Custom configurations — non-standard core counts, jacket colours, or special compounds — carry a 500 metre MOQ. Samples of 5–10 metres are available free of charge for qualification testing.
Use shielded (P or PP suffix) whenever the cable runs alongside servo drives, VFDs, or inverters, or when carrying encoder, sensor, or analogue signals. Unshielded is suitable for pure power distribution and simple on/off control lines. If in doubt, our engineering team can review your cabinet layout and advise — this is included with any quotation.
Yes. Send us the existing part number or a sample and we will produce a cross-reference specification with matching electrical, mechanical, and dimensional characteristics. Most cross-references are turned around within 3 working days, with a physical sample following within 7 days.
Standard shipments include the CE Declaration of Conformity, RoHS and REACH statements, and the batch test report. UL Recognition (UL 2464 / UL 20549) is available on request for North American projects — specify this at the quotation stage as it affects the material specification.
Standard configurations ship in 15 working days from order confirmation. Custom-engineered specifications typically require 20–25 working days, depending on compound availability. Rapid sampling for new specifications is 7 days. We will confirm the exact date in writing with your order acknowledgement.
Engineering Support for Your Application
Tell Us How Your Cable Needs to Move
Send us a datasheet, drawing, existing cable model or a short description of your application. Our engineering team will help you identify a suitable cable construction.
- 01 Motion type, travel distance and minimum bend radius
- 02 Voltage, current, signal protocol and shielding needs
- 03 Operating environment, target service life and quantity
