Halogen-Free Twisted-Pair Screened Marine Data Cable 350 V
This halogen-free marine data cable uses twisted-pair construction and an overall tinned copper screen to support reliable signal transmission with reduced crosstalk and electromagnetic interference. Its flexible, compact design is suitable for protected marine instrumentation and control wiring.
Key Highlights
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Designed for paired signal, measurement and communication circuits aboard ships where EMC performance and crosstalk attenuation are important.
Typical applications include:
- Marine automation systems
- Instrumentation and monitoring equipment
- Paired sensor and actuator circuits
- Communication and low-level signal systems
- Navigation and control equipment
- EMC-sensitive wiring above or below deck
The cable should be installed with mechanical protection and should not remain in permanent contact with oils or fuels unless a suitable sheath is specified.
Conductor: Fine-stranded tinned copper, Class 5 according to IEC 60228/VDE 0295
Core insulation: Special halogen-free compound
Core identification: Color-coded with reference to DIN 47100
Pair formation: Individually identified cores twisted together in pairs
Cable assembly: Pairs stranded together in layers
Inner wrapping: Foil
Overall screen: Tinned copper braid
Outer sheath: Halogen-free SHF1 compound according to IEC 60092-360
Standard sheath color: Pigeon blue, similar to RAL 5014
Optional construction: Alternative color codes, bare copper conductors and customized sheath colors available on request
Maximum operating voltage: 350 V
Test voltage:
- Core-to-core: 1500 V
- Core-to-screen: 1200 V
Minimum bending radius:
- Fixed installation: 5 × cable diameter
- Flexible application: 10 × cable diameter
Temperature range:
- Fixed installation: −40°C to +90°C
- Flexible application: −30°C to +90°C
Halogen-free performance: IEC 60754-1
Flame propagation: IEC 60332-3-22, Category A
Flame retardancy: IEC 60332-1-2
Corrosiveness of combustion gases: IEC 60754-2
Smoke density: IEC 61034
Conductor class: IEC 60228 Class 5
Sheath standard: IEC 60092-360 SHF1
Environmental compliance: RoHS-compatible materials
Project-specific marine approvals must be confirmed for the selected size and production specification.
Representative standard configurations:
| Number of Pairs × Cross-Section | Approx. Outer Diameter | Copper Weight | Approx. Cable Weight |
| 2 × 2 × 0.14 mm² | 5.3 mm | 19.5 kg/km | 37 kg/km |
| 18 × 2 × 0.14 mm² | 12.4 mm | 102.9 kg/km | 200 kg/km |
| 2 × 2 × 0.25 mm² | 5.8 mm | 25.7 kg/km | 44 kg/km |
| 26 × 2 × 0.25 mm² | 16.3 mm | 223.2 kg/km | 368 kg/km |
| 2 × 2 × 0.34 mm² | 6.4 mm | 30.7 kg/km | 56 kg/km |
| 27 × 2 × 0.34 mm² | 18.2 mm | 289.0 kg/km | 478 kg/km |
| 2 × 2 × 0.50 mm² | 7.2 mm | 40.5 kg/km | 70 kg/km |
| 18 × 2 × 0.50 mm² | 17.4 mm | 283.5 kg/km | 451 kg/km |
| 2 × 2 × 0.75 mm² | 7.9 mm | 52.5 kg/km | 87 kg/km |
| 18 × 2 × 0.75 mm² | 19.4 mm | 384.0 kg/km | 553 kg/km |
Outer diameters are subject to a tolerance of approximately ±10%. Available pair counts vary according to conductor size.
THE FACTORY
BEHIND EVERY METER
Founded in 2007 in Foshan, Guangdong, Hulk Electric has grown from a regional producer into a globally recognised manufacturer of customised industrial cable solutions. Our 10,000㎡ facility runs on Toyota Production System lean principles, operated by 150+ skilled professionals producing over 300,000 metres every month.
Every cable you see on this page — including the HK-TRVV series — is engineered, extruded, tested, and shipped from that single facility. No trading company sits between you and the extrusion line.
Source Factory
Direct manufacturer — no middlemen, no markups. You deal with the engineers who run the line.
Deep Customization
Conductor, shielding, jacket compound, colour coding, certification — built to your exact spec.
7-Day Sampling
Rapid samples for new specifications. 15-day lead time on standard production orders.
Global Compliance
35+ certifications covering UL, CE, TÜV, IEC, RoHS and REACH for every major market.
BEFORE YOU ORDER
For stocked configurations listed in the ordering table, MOQ is 100 metres per specification. Custom configurations — non-standard core counts, jacket colours, or special compounds — carry a 500 metre MOQ. Samples of 5–10 metres are available free of charge for qualification testing.
Use shielded (P or PP suffix) whenever the cable runs alongside servo drives, VFDs, or inverters, or when carrying encoder, sensor, or analogue signals. Unshielded is suitable for pure power distribution and simple on/off control lines. If in doubt, our engineering team can review your cabinet layout and advise — this is included with any quotation.
Yes. Send us the existing part number or a sample and we will produce a cross-reference specification with matching electrical, mechanical, and dimensional characteristics. Most cross-references are turned around within 3 working days, with a physical sample following within 7 days.
Standard shipments include the CE Declaration of Conformity, RoHS and REACH statements, and the batch test report. UL Recognition (UL 2464 / UL 20549) is available on request for North American projects — specify this at the quotation stage as it affects the material specification.
Standard configurations ship in 15 working days from order confirmation. Custom-engineered specifications typically require 20–25 working days, depending on compound availability. Rapid sampling for new specifications is 7 days. We will confirm the exact date in writing with your order acknowledgement.
Engineering Support for Your Application
Tell Us How Your Cable Needs to Move
Send us a datasheet, drawing, existing cable model or a short description of your application. Our engineering team will help you identify a suitable cable construction.
- 01 Motion type, travel distance and minimum bend radius
- 02 Voltage, current, signal protocol and shielding needs
- 03 Operating environment, target service life and quantity
