Screened PVC PROFINET Type A Fixed-Installation Cable
A screened PROFINET Type A cable design for fixed machine and plant networks. The reference uses four solid 22 AWG copper conductors in a star-quad layout, an overall tinned copper braid, and a green PVC jacket with a 5.3 mm nominal diameter.
Key Highlights
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
This construction suits stationary links between control cabinets, switches, and fixed I/O stations. The solid conductors are intended for routes that remain stationary in service, such as cable trays and machine frames. Match the connector contacts to solid 22 AWG conductors and allow for the fixed bend radius at cabinet entries. PROFINET cables for fixed and moving installations
| Component | Reference specification |
| Cable configuration | 2 × 2 × 22 AWG |
| Conductors | Solid bare copper |
| Insulation | PE, L/MD grade per EN 50290-2-23 |
| Core identification | Blue, yellow, white, and orange |
| Core lay | Four-core star quad per the SAB series datasheet |
| Core wrap | PETP polyester film |
| Overall screen | Tinned copper braid |
| Outer jacket | Green PVC, similar to RAL 6018 |
| Property | Reference value |
| Peak operating voltage | 350 V max. |
| Dielectric test voltage | 1,500 V core to core and 1,200 V core to screen |
| Minimum bend radius | 5 × cable OD for fixed installation |
| Fixed-installation temperature | −30 to +70 °C |
| Additional temperature entry in SAB data | −5 to +70 °C under the flexible-temperature heading |
| Characteristic impedance | 100 ± 5 Ω |
| Transmission reference | EN 50288-2-2 and VDE 0819-2-2, CAT 5 per EN 50173-1 |
| Network applications listed by SAB | PROFINET, EtherCAT, and EtherNet/IP |
| Oil resistance reference | SAB internal test method |
| SAB material declarations | EU RoHS conformity and PFAS-free designation |
| SAB item no. | Cable size | Max. insulated core OD | Cable OD ±10% | Copper figure | Approx. weight | Max. DC resistance at 20 °C per VDE 0812 |
| L06542202 | 2 × 2 × 22 AWG | 1.55 mm | 5.3 mm | 28.0 kg/km | 43 kg/km | 54.1 Ω/km |
THE FACTORY
BEHIND EVERY METER
Founded in 2007 in Foshan, Guangdong, Hulk Electric has grown from a regional producer into a globally recognised manufacturer of customised industrial cable solutions. Our 10,000㎡ facility runs on Toyota Production System lean principles, operated by 150+ skilled professionals producing over 300,000 metres every month.
Every cable you see on this page — including the HK-TRVV series — is engineered, extruded, tested, and shipped from that single facility. No trading company sits between you and the extrusion line.
Source Factory
Direct manufacturer — no middlemen, no markups. You deal with the engineers who run the line.
Deep Customization
Conductor, shielding, jacket compound, colour coding, certification — built to your exact spec.
7-Day Sampling
Rapid samples for new specifications. 15-day lead time on standard production orders.
Global Compliance
35+ certifications covering UL, CE, TÜV, IEC, RoHS and REACH for every major market.
BEFORE YOU ORDER
For stocked configurations listed in the ordering table, MOQ is 100 metres per specification. Custom configurations — non-standard core counts, jacket colours, or special compounds — carry a 500 metre MOQ. Samples of 5–10 metres are available free of charge for qualification testing.
Use shielded (P or PP suffix) whenever the cable runs alongside servo drives, VFDs, or inverters, or when carrying encoder, sensor, or analogue signals. Unshielded is suitable for pure power distribution and simple on/off control lines. If in doubt, our engineering team can review your cabinet layout and advise — this is included with any quotation.
Yes. Send us the existing part number or a sample and we will produce a cross-reference specification with matching electrical, mechanical, and dimensional characteristics. Most cross-references are turned around within 3 working days, with a physical sample following within 7 days.
Standard shipments include the CE Declaration of Conformity, RoHS and REACH statements, and the batch test report. UL Recognition (UL 2464 / UL 20549) is available on request for North American projects — specify this at the quotation stage as it affects the material specification.
Standard configurations ship in 15 working days from order confirmation. Custom-engineered specifications typically require 20–25 working days, depending on compound availability. Rapid sampling for new specifications is 7 days. We will confirm the exact date in writing with your order acknowledgement.
Engineering Support for Your Application
Tell Us How Your Cable Needs to Move
Send us a datasheet, drawing, existing cable model or a short description of your application. Our engineering team will help you identify a suitable cable construction.
- 01 Motion type, travel distance and minimum bend radius
- 02 Voltage, current, signal protocol and shielding needs
- 03 Operating environment, target service life and quantity