Screened Combined Servo Motor Power and Control Cable 0.6/1 kV
This combined servo motor cable integrates 0.6/1 kV motor-supply conductors with one or two screened control or brake pairs. A low-capacitance insulation system, individually screened control elements, an overall copper braid and a durable PUR sheath support compact installation in dynamic servo-drive systems.
Key Highlights
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Recommended for servo motors requiring motor power plus brake, temperature-monitoring or auxiliary control circuits in the same cable.
Typical applications include:
- Servo motors and drive controllers
- Motor brake circuits
- Temperature-sensor and auxiliary-control connections
- CNC machinery
- Automated assembly systems
- Packaging equipment
- Industrial robots without continuous torsion
- Cable tracks and energy chains
This construction combines motor power with auxiliary control pairs. It is not a substitute for a full encoder or digital-feedback hybrid cable unless the required feedback interface has been specifically engineered and tested.
| Component | Description |
| Conductor | Fine-stranded bare copper, Class 6 based on IEC 60228 |
| Core insulation | Special halogen-free, low-capacitance polymer compound |
| Power-core identification | Black numbered cores with green/yellow protective-earth conductor |
| Control-core identification | Numbered, black/white or application-specific identification |
| Control formation | Control conductors twisted into pairs |
| Control-pair screen | Aluminum-laminated foil and tinned-copper wire braid |
| Pair wrapping | Protective polymer foil |
| Overall assembly | Screened control pairs and supply cores stranded with fillers |
| Inner wrapping | Nonwoven tape |
| Overall screen | Tinned-copper wire braid |
| Screen wrapping | Nonwoven tape |
| Outer sheath | Matte oil- and abrasion-resistant polyurethane |
| Standard sheath color | Orange, similar to RAL 2003 |
| Property | Reference Value |
| Nominal voltage, supply conductors | U₀/U 0.6/1 kV |
| Peak operating voltage, control conductors | Maximum 350 V |
| Reference North American voltage | 1000 V, certification-dependent |
| Test voltage, supply core to core | 4000 V |
| Test voltage, supply core to screen | 4000 V |
| Test voltage, control core to core | 2000 V |
| Test voltage, control core to screen | 2000 V |
| Fixed bending radius | 5 × cable diameter |
| Flexible bending radius | 10 × cable diameter |
| Fixed temperature range | −50°C to +90°C |
| Flexible temperature range | −40°C to +90°C |
| Reference North American temperature | Up to +80°C, certification-dependent |
| Halogen-free performance | Based on IEC 60754-1 |
| Flame performance | Based on IEC 60332-1-2 |
| Oil resistance | PUR performance based on EN 50363-10-2 |
| Chemical resistance | Good resistance to acids, alkaline solutions, solvents and hydraulic fluids |
| Weather resistance | Very good reference performance |
| Compliance options | RoHS-, PFAS-free and PWIS-compatible material options |
Representative configurations:
| Cable Configuration | Approx. Outer Ø | Copper Weight | Approx. Cable Weight |
| 4 × 1.00 mm² + screened 2 × 0.50 mm² | 9.0 ± 0.8 mm | 88.2 kg/km | 120 kg/km |
| 4 × 1.50 mm² + screened 2 × 0.50 mm² | 9.5 ± 0.8 mm | 108.0 kg/km | 142 kg/km |
| 4 × 1.50 mm² + screened 2 × 1.50 mm² | 10.7 ± 0.8 mm | 150.5 kg/km | 189 kg/km |
| 4 × 1.50 mm² + 2 × screened 2 × 0.75 mm² | 11.4 ± 0.8 mm | 166.5 kg/km | 211 kg/km |
| 4 × 4.00 mm² + screened 2 × 1.00 mm² + screened 2 × 1.50 mm² | 15.0 ± 0.8 mm | 303.2 kg/km | 373 kg/km |
| 4 × 6.00 mm² + screened 2 × 1.50 mm² | 16.3 ± 0.8 mm | 376.8 kg/km | 450 kg/km |
| 4 × 10.00 mm² + screened 2 × 1.00 mm² + screened 2 × 1.50 mm² | 19.3 ± 0.8 mm | 581.3 kg/km | 692 kg/km |
| 4 × 16.00 mm² + 2 × screened 2 × 1.50 mm² | 22.9 ± 0.8 mm | 860.1 kg/km | 1012 kg/km |
Additional power sizes, control-pair combinations and drive-specific core-identification systems are available on request.
THE FACTORY
BEHIND EVERY METER
Founded in 2007 in Foshan, Guangdong, Hulk Electric has grown from a regional producer into a globally recognised manufacturer of customised industrial cable solutions. Our 10,000㎡ facility runs on Toyota Production System lean principles, operated by 150+ skilled professionals producing over 300,000 metres every month.
Every cable you see on this page — including the HK-TRVV series — is engineered, extruded, tested, and shipped from that single facility. No trading company sits between you and the extrusion line.
Source Factory
Direct manufacturer — no middlemen, no markups. You deal with the engineers who run the line.
Deep Customization
Conductor, shielding, jacket compound, colour coding, certification — built to your exact spec.
7-Day Sampling
Rapid samples for new specifications. 15-day lead time on standard production orders.
Global Compliance
35+ certifications covering UL, CE, TÜV, IEC, RoHS and REACH for every major market.
BEFORE YOU ORDER
For stocked configurations listed in the ordering table, MOQ is 100 metres per specification. Custom configurations — non-standard core counts, jacket colours, or special compounds — carry a 500 metre MOQ. Samples of 5–10 metres are available free of charge for qualification testing.
Use shielded (P or PP suffix) whenever the cable runs alongside servo drives, VFDs, or inverters, or when carrying encoder, sensor, or analogue signals. Unshielded is suitable for pure power distribution and simple on/off control lines. If in doubt, our engineering team can review your cabinet layout and advise — this is included with any quotation.
Yes. Send us the existing part number or a sample and we will produce a cross-reference specification with matching electrical, mechanical, and dimensional characteristics. Most cross-references are turned around within 3 working days, with a physical sample following within 7 days.
Standard shipments include the CE Declaration of Conformity, RoHS and REACH statements, and the batch test report. UL Recognition (UL 2464 / UL 20549) is available on request for North American projects — specify this at the quotation stage as it affects the material specification.
Standard configurations ship in 15 working days from order confirmation. Custom-engineered specifications typically require 20–25 working days, depending on compound availability. Rapid sampling for new specifications is 7 days. We will confirm the exact date in writing with your order acknowledgement.
Engineering Support for Your Application
Tell Us How Your Cable Needs to Move
Send us a datasheet, drawing, existing cable model or a short description of your application. Our engineering team will help you identify a suitable cable construction.
- 01 Motion type, travel distance and minimum bend radius
- 02 Voltage, current, signal protocol and shielding needs
- 03 Operating environment, target service life and quantity
