Flexible PVC Tray and Machine-Tool Cable 600 V – Yellow Jacket
This 600 V flexible industrial cable features yellow numbered cores for easy circuit identification and a black, sunlight- and oil-resistant PVC sheath. It is developed for cable trays, machine wiring and industrial control connections.
Key Highlights
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Typical applications include:
- Industrial machinery
- Machine tools and CNC equipment
- Control cabinets and machine connections
- Automated assembly systems
- Production, packaging and bottling lines
- Cable trays and exposed runs
- Circuits requiring yellow core identification
Conductor: Fine-stranded bare copper based on IEC 60228 Class 5 reference requirements
Core insulation: Special PVC/Nylon compound
Core identification: Yellow cores with numbers
Protective conductor: Green/yellow earth core from three-core versions where required
Stranding: Layer-stranded core assembly
Outer sheath: Sunlight- and oil-resistant PVC
Standard sheath color: Black, similar to RAL 9005
Reference voltage: 600 V for UL AWM, Type TC and cUL applications; 1000 V WTTC reference rating
Test voltage: 6000 V for AWG 18–10 and 7500 V for AWG 8–2
Minimum bending radius:
- Fixed: 3 × D below 12 mm; 4 × D above 12 mm
- Flexible: 5 × D below 12 mm; 6 × D above 12 mm
Reference temperature: Up to +105°C under UL AWM; up to +90°C under UL/cUL; fixed installation down to −25°C under UL AWM reference
Reference flame performance: UL FT4 and cUL FT1, FT2 and FT4
Oil resistance: Oil Resistance I reference
Sunlight resistance: Yes
Radiation resistance: Approximately 8 × 10⁷ cJ/kg
Installation references: Exposed Run, Direct Burial and Machinery Area
Design references: TC-ER, MTW, WTTC, AWM Style 21179, cUL Type CIC and NFPA 79
| Cores × Size | Largest Wire Ø | Approx. Outer Ø | Copper Weight | Approx. Cable Weight |
| 3 × 18 AWG | 0.21 mm | 7.7 mm | 28.8 kg/km | 83 kg/km |
| 12 × 18 AWG | 0.21 mm | 12.5 mm | 115.2 kg/km | 227 kg/km |
| 3 × 16 AWG | 0.26 mm | 8.3 mm | 43.2 kg/km | 103 kg/km |
| 12 × 16 AWG | 0.26 mm | 14.5 mm | 172.8 kg/km | 313 kg/km |
| 4 × 12 AWG | 0.31 mm | 11.4 mm | 153.6 kg/km | 238 kg/km |
Outer-diameter tolerance: Approximately ±10%
THE FACTORY
BEHIND EVERY METER
Founded in 2007 in Foshan, Guangdong, Hulk Electric has grown from a regional producer into a globally recognised manufacturer of customised industrial cable solutions. Our 10,000㎡ facility runs on Toyota Production System lean principles, operated by 150+ skilled professionals producing over 300,000 metres every month.
Every cable you see on this page — including the HK-TRVV series — is engineered, extruded, tested, and shipped from that single facility. No trading company sits between you and the extrusion line.
Source Factory
Direct manufacturer — no middlemen, no markups. You deal with the engineers who run the line.
Deep Customization
Conductor, shielding, jacket compound, colour coding, certification — built to your exact spec.
7-Day Sampling
Rapid samples for new specifications. 15-day lead time on standard production orders.
Global Compliance
35+ certifications covering UL, CE, TÜV, IEC, RoHS and REACH for every major market.
BEFORE YOU ORDER
For stocked configurations listed in the ordering table, MOQ is 100 metres per specification. Custom configurations — non-standard core counts, jacket colours, or special compounds — carry a 500 metre MOQ. Samples of 5–10 metres are available free of charge for qualification testing.
Use shielded (P or PP suffix) whenever the cable runs alongside servo drives, VFDs, or inverters, or when carrying encoder, sensor, or analogue signals. Unshielded is suitable for pure power distribution and simple on/off control lines. If in doubt, our engineering team can review your cabinet layout and advise — this is included with any quotation.
Yes. Send us the existing part number or a sample and we will produce a cross-reference specification with matching electrical, mechanical, and dimensional characteristics. Most cross-references are turned around within 3 working days, with a physical sample following within 7 days.
Standard shipments include the CE Declaration of Conformity, RoHS and REACH statements, and the batch test report. UL Recognition (UL 2464 / UL 20549) is available on request for North American projects — specify this at the quotation stage as it affects the material specification.
Standard configurations ship in 15 working days from order confirmation. Custom-engineered specifications typically require 20–25 working days, depending on compound availability. Rapid sampling for new specifications is 7 days. We will confirm the exact date in writing with your order acknowledgement.
Engineering Support for Your Application
Tell Us How Your Cable Needs to Move
Send us a datasheet, drawing, existing cable model or a short description of your application. Our engineering team will help you identify a suitable cable construction.
- 01 Motion type, travel distance and minimum bend radius
- 02 Voltage, current, signal protocol and shielding needs
- 03 Operating environment, target service life and quantity
