Flexible PVC Tray and Machine-Tool Cable 600 V – Red Jacket
This flexible PVC tray and machine-tool cable uses red numbered cores for clear circuit identification. Its oil- and sunlight-resistant black outer sheath supports industrial use in cable trays, machinery areas and control-panel connections.
Key Highlights
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Recommended for:
- Machine tools and machining centers
- Industrial control and automation systems
- Assembly lines
- Packaging and bottling machinery
- Data-processing equipment
- Panel-to-machine connections
- Circuits requiring red core identification
- Exposed-run and direct-burial applications where approved
Conductor: Fine-stranded bare copper based on Class 5 reference requirements
Core insulation: Special PVC/Nylon compound
Core identification: Red cores with numbers
Protective conductor: Green/yellow core from three-core versions where required
Stranding: Cores stranded in layers
Outer sheath: Special oil- and sunlight-resistant PVC
Standard sheath color: Black, similar to RAL 9005
Reference voltage: 600 V for UL AWM, Type TC and cUL applications; 1000 V WTTC reference rating
Test voltage:
- AWG 18–10: 6000 V
- AWG 8–2: 7500 V
Minimum bending radius:
- Fixed: 3 × D below 12 mm; 4 × D above 12 mm
- Flexible: 5 × D below 12 mm; 6 × D above 12 mm
Temperature: Up to +105°C under UL AWM reference; up to +90°C for UL/cUL listed applications; down to −25°C in fixed UL AWM reference installations
Flame performance reference: UL FT4 and cUL FT1, FT2 and FT4
Environmental properties: Oil Resistance I, sunlight resistance and RoHS reference
Installation references: Exposed Run, Direct Burial and Machinery Area
Radiation resistance: Approximately 8 × 10⁷ cJ/kg
Compliance design references: Type TC-ER, MTW, WTTC, AWM Style 21179, cUL Type CIC and NFPA 79
| Cores × Size | Largest Wire Ø | Approx. Outer Ø | Copper Weight | Approx. Cable Weight |
| 3 × 18 AWG | 0.21 mm | 7.7 mm | 28.8 kg/km | 83 kg/km |
| 12 × 18 AWG | 0.21 mm | 12.5 mm | 115.2 kg/km | 227 kg/km |
| 3 × 16 AWG | 0.26 mm | 8.3 mm | 43.2 kg/km | 103 kg/km |
| 12 × 16 AWG | 0.26 mm | 14.5 mm | 172.8 kg/km | 313 kg/km |
| 4 × 12 AWG | 0.31 mm | 11.4 mm | 153.6 kg/km | 238 kg/km |
Outer-diameter tolerance: Approximately ±10%
THE FACTORY
BEHIND EVERY METER
Founded in 2007 in Foshan, Guangdong, Hulk Electric has grown from a regional producer into a globally recognised manufacturer of customised industrial cable solutions. Our 10,000㎡ facility runs on Toyota Production System lean principles, operated by 150+ skilled professionals producing over 300,000 metres every month.
Every cable you see on this page — including the HK-TRVV series — is engineered, extruded, tested, and shipped from that single facility. No trading company sits between you and the extrusion line.
Source Factory
Direct manufacturer — no middlemen, no markups. You deal with the engineers who run the line.
Deep Customization
Conductor, shielding, jacket compound, colour coding, certification — built to your exact spec.
7-Day Sampling
Rapid samples for new specifications. 15-day lead time on standard production orders.
Global Compliance
35+ certifications covering UL, CE, TÜV, IEC, RoHS and REACH for every major market.
BEFORE YOU ORDER
For stocked configurations listed in the ordering table, MOQ is 100 metres per specification. Custom configurations — non-standard core counts, jacket colours, or special compounds — carry a 500 metre MOQ. Samples of 5–10 metres are available free of charge for qualification testing.
Use shielded (P or PP suffix) whenever the cable runs alongside servo drives, VFDs, or inverters, or when carrying encoder, sensor, or analogue signals. Unshielded is suitable for pure power distribution and simple on/off control lines. If in doubt, our engineering team can review your cabinet layout and advise — this is included with any quotation.
Yes. Send us the existing part number or a sample and we will produce a cross-reference specification with matching electrical, mechanical, and dimensional characteristics. Most cross-references are turned around within 3 working days, with a physical sample following within 7 days.
Standard shipments include the CE Declaration of Conformity, RoHS and REACH statements, and the batch test report. UL Recognition (UL 2464 / UL 20549) is available on request for North American projects — specify this at the quotation stage as it affects the material specification.
Standard configurations ship in 15 working days from order confirmation. Custom-engineered specifications typically require 20–25 working days, depending on compound availability. Rapid sampling for new specifications is 7 days. We will confirm the exact date in writing with your order acknowledgement.
Engineering Support for Your Application
Tell Us How Your Cable Needs to Move
Send us a datasheet, drawing, existing cable model or a short description of your application. Our engineering team will help you identify a suitable cable construction.
- 01 Motion type, travel distance and minimum bend radius
- 02 Voltage, current, signal protocol and shielding needs
- 03 Operating environment, target service life and quantity
