Halogen-Free Rail Data Cable for EN 45545-2 and NFPA 130
This flexible halogen-free rail data cable is designed for signal and low-voltage data transmission inside railway vehicles. Its lightweight unscreened construction combines good flexibility with low-smoke, flame-retardant and self-extinguishing performance.
Key Highlights
Unscreened rail data cable · Lightweight flexible construction · EN 45545-2 R15 HL1–HL3 · NFPA 130 fire performance · UN/ECE R118 flame retardancy · Low smoke · Halogen-free · No flame propagation · Self-extinguishing · DIN 47100 core identification · RoHS compliant · PFAS-free option
Suitable for the internal wiring of railway vehicles, including control electronics, onboard monitoring systems, passenger information equipment, measuring devices and data circuits that do not require electromagnetic screening.
It is recommended for fixed installation and occasional flexible use in railway environments where reduced smoke, limited flame propagation and non-corrosive combustion gases are important.
Conductor: Flexible bare copper strands based on IEC 60228 and VDE 0295, Class 5
Core insulation: Special halogen-free insulation compound
Core identification: Color coded with reference to DIN 47100
Core arrangement: Cores stranded together in layers
Outer sheath: Special halogen-free compound
Standard sheath color: Grey, similar to RAL 7032
Screen: Unscreened construction
Peak operating voltage:
Below 0.25 mm²: Maximum 350 V
0.25 mm² and above: Maximum 500 V
Testing voltage: 1500 V core to core
Minimum bending radius:
Fixed installation: 5 × cable diameter
Flexible use: 10 × cable diameter
Temperature range:
Fixed installation: −40°C to +90°C
Flexible use: −30°C to +90°C
Railway fire protection: EN 45545-2, requirement set R15 (EL1A), Hazard Levels HL1–HL3
North American railway fire protection: NFPA 130, Sections 8.6.7.1.1.1 and 12.2.1
Flame propagation: IEC 60332-3-24, IEC 60332-3-25 and EN 50305 Section 9.1.2
Flame retardancy: UL 1685 Section 12, FT4/IEEE 1202 and ISO 6722 / UN/ECE R118
Individual cable flame test: IEC 60332-1-2
Toxicity: EN 50305
Smoke density: IEC 61034
Halogen-free requirements: EN 50306-1 and EN 50264-1
Hydrogen chloride content: Less than 0.5% according to IEC 60754-1
Combustion gas pH value: Greater than 4.3 according to IEC 60754-2
Conductivity: Less than 10 µS/mm according to IEC 60754-2
Fluorine content: Less than 0.1% according to IEC 60684-2
Environmental compliance: RoHS compliant; PFAS-free material formulation available
Available conductor size range: 0.14–1.50 mm²
Available core configurations: 2–61 cores, depending on conductor size
Approximate overall diameter range: 3.1–19.8 mm
| Cable Configuration | Approx. Outer Diameter | Copper Weight | Approx. Cable Weight |
| 2 × 0.14 mm² | 3.1 mm | 2.7 kg/km | 13 kg/km |
| 12 × 0.14 mm² | 5.3 mm | 16.1 kg/km | 38 kg/km |
| 2 × 0.25 mm² | 3.4 mm | 4.8 kg/km | 17 kg/km |
| 12 × 0.25 mm² | 6.1 mm | 28.8 kg/km | 57 kg/km |
| 2 × 0.34 mm² | 4.0 mm | 6.5 kg/km | 24 kg/km |
| 12 × 0.34 mm² | 7.3 mm | 39.2 kg/km | 80 kg/km |
| 2 × 0.50 mm² | 4.3 mm | 9.6 kg/km | 28 kg/km |
| 12 × 0.50 mm² | 8.1 mm | 57.6 kg/km | 102 kg/km |
| 2 × 0.75 mm² | 4.9 mm | 14.4 kg/km | 38 kg/km |
| 12 × 0.75 mm² | 9.4 mm | 86.4 kg/km | 142 kg/km |
| 2 × 1.00 mm² | 5.1 mm | 19.2 kg/km | 43 kg/km |
| 7 × 1.00 mm² | 7.3 mm | 67.2 kg/km | 104 kg/km |
| 2 × 1.50 mm² | 5.6 mm | 28.8 kg/km | 55 kg/km |
| 7 × 1.50 mm² | 8.4 mm | 100.8 kg/km | 144 kg/km |
Additional conductor sizes, core counts, sheath colors and customized dimensions are available on request.
THE FACTORY
BEHIND EVERY METER
Founded in 2007 in Foshan, Guangdong, Hulk Electric has grown from a regional producer into a globally recognised manufacturer of customised industrial cable solutions. Our 10,000㎡ facility runs on Toyota Production System lean principles, operated by 150+ skilled professionals producing over 300,000 metres every month.
Every cable you see on this page — including the HK-TRVV series — is engineered, extruded, tested, and shipped from that single facility. No trading company sits between you and the extrusion line.
Source Factory
Direct manufacturer — no middlemen, no markups. You deal with the engineers who run the line.
Deep Customization
Conductor, shielding, jacket compound, colour coding, certification — built to your exact spec.
7-Day Sampling
Rapid samples for new specifications. 15-day lead time on standard production orders.
Global Compliance
35+ certifications covering UL, CE, TÜV, IEC, RoHS and REACH for every major market.
BEFORE YOU ORDER
For stocked configurations listed in the ordering table, MOQ is 100 metres per specification. Custom configurations — non-standard core counts, jacket colours, or special compounds — carry a 500 metre MOQ. Samples of 5–10 metres are available free of charge for qualification testing.
Use shielded (P or PP suffix) whenever the cable runs alongside servo drives, VFDs, or inverters, or when carrying encoder, sensor, or analogue signals. Unshielded is suitable for pure power distribution and simple on/off control lines. If in doubt, our engineering team can review your cabinet layout and advise — this is included with any quotation.
Yes. Send us the existing part number or a sample and we will produce a cross-reference specification with matching electrical, mechanical, and dimensional characteristics. Most cross-references are turned around within 3 working days, with a physical sample following within 7 days.
Standard shipments include the CE Declaration of Conformity, RoHS and REACH statements, and the batch test report. UL Recognition (UL 2464 / UL 20549) is available on request for North American projects — specify this at the quotation stage as it affects the material specification.
Standard configurations ship in 15 working days from order confirmation. Custom-engineered specifications typically require 20–25 working days, depending on compound availability. Rapid sampling for new specifications is 7 days. We will confirm the exact date in writing with your order acknowledgement.
SEND US YOUR
SPECIFICATION
Tell us your core count, cross-section, and application — our engineering team will confirm the right configuration and send pricing within one working day.
Your information is used only to prepare your quotation and is never shared with third parties.
RELATED SERIES
Halogen-Free Screened Control Cable with Numbered Cores
Low smoke zero halogen jacket with numbered cores for fast identification during panel wiring and maintenance.
View Product →
Halogen-Free Single Conductor Wiring Cable 450/750 V
Extended temperature range for control cabinet and switchgear wiring where flame behaviour is critical.
View Product →
Halogen-Free Screened Control Cable with Numbered Cores
Low smoke zero halogen construction with braid screening for reliable EMC performance in dense cabinets.
View Product →
Halogen-Free Single Conductor Wiring Cable 600 V UL
Flame retardant and UL recognised for North American panel builds and export-bound equipment.
View Product →